(0 Item)

Sample Preparation for Virus,Toxin and Pathogen Detection and Identification Conference 2011

Business Conference - Sample Preparation for Virus,Toxin and Pathogen Detection and Identification Conference 2011
Business Conference

By : Knowledge Foundation

Date : 2011

Location : United States US / San Diego

PDF 455p Video 18m
Description :

Sample Preparation for Virus, Toxin & Pathogen Detection & Identification 2011 conference focuses on the detection and identification of biological and chemical agents and threats, as well as the latest R&D developments.

Keywords :

Nucleic Acid, Biomedical Engineering, paramagnetic particles, immiscible-phase filter, Synchronous Coefficient of Drag Alteration, dielectrophoresis, formalin fixed paraffin-embedded, bioaerosol,

Associated industries : Biotechnology - Chemistry - Engineering - Pharmaceutical -

The 4th annual Sample Prep 2011 conference an internationally recognized meeting for experts in sample preparation technologies for detection and identification of biological and chemical agents and threats, explores the latest R&D developments as well as ready-to-market technologies and systems for:


- Sample collection
- (Pre-) concentration
- Lysis
- Target extraction
- Transfer to analytical module

Leading experts from government, academia and industry address the following discussion issues and areas of focused technology development and implementation:

- Alternative sample prep technologies
- Sample prep as separate vs. integrated module approach
- Sample prep with micro- and nanofluidics
- Nanotechnology challenges for sample preparation
- Robust sampling methodologies
- Food, water, air, and environmental sampling
- Novel methods of extraction from tough (non-filterable) matrices
- Single use sample concentration modules
- Advanced lateral flow assays for sample prep
- Nucleic acid or protein based sample prep for next generation sequencing

- Sample prep technologies for detection/diagnostics vs. pharma

 

Documentation Includes a PDF file with 18 presentations and papers (455 pages)

 

 

Abstracts of presentations and papers included in the documentation
 
Development of IPF Automated Nucleic Acid Extraction System
David Kelso, PhD, and Kunal Sur, Center for Innovation in Global Health

 

Technologies (CIGHT), Dept of Biomedical Engineering, Northwestern University
Pre-analytical processing typically involves nucleic acid capture on paramagnetic particles (PMPs), extensive washing to remove inhibitors and elution. We have developed an extraction method which replaces wash steps with transporting PMPs though an immiscible-phase filter (IPF) yielding nucleic acid as pure as that obtained from conventional purification. A flexible automated system applicable to a broad range of biological matrices will extract nucleic acids with minimal user input is under development.

 

 

Nucleic Acid Sequence and Methylation Enrichment Using SCODA

Andre Marziali, PhD, President and CSO, Boreal Genomics Inc.; Director, Engineering Physics, Dept of Physics and Astronomy, University of British Columbia, Canada

 

We have previously presented a novel electrophoretic concentration technology, named SCODA (Synchronous Coefficient of Drag Alteration) for efficiently purifying and concentrating nucleic acids. SCODA is able to purify DNA from a variety of complex matrices, including samples that contain strong PCR inhibitors. We are also able to recover nucleic acids from extremely dilute samples, with successful concentration from starting DNA concentrations in the zeptomolar range. More recently we have demonstrated that SCODA can be made specific to the sequence of DNA targets to be concentrated, opening the opportunity for sequence enrichment applications. Recent experiments show that SCODA can enrich for single nucleotide mutations by 10,000 fold compared to the wild type, and that it is capable of separating identical sequences that differ only in degree of methylation. This presentation will give a brief overview of the SCODA technology with emphasis on recent progress in sequence specific DNA concentration.

 

 

Rapid Isolation and Detection of Virus Directly from Whole Blood Samples Using HC-DEP

Michael J. Heller, PhD, Professor, Depts of Nanoengineering and Bioengineering, University of California San Diego

 

A high conductance dielectrophoresis (HC-DEP) procedure has been developed which allows rapid separation and detection of virus directly from 'un-diluted whole blood' samples. Using a HC-DEP microarray device, red fluorescent Cherry T7 bacteriophage was separated from whole blood samples in minutes. The fluorescent T7 bacteriophage is held in high field areas while blood cells move to low field areas. All the blood cells are washed away, while the fluorescent T7 bacteriophage remains in the high field areas. The isolated, highly purified viruses are then ready for further analysis.

 

Unravelling the Potential of Formalin-Fixed Paraffin-Embedded Tissue

Martin Schlumpberger, Senior Scientist R&D, Qiagen GmbH, Germany

 

The vast archives of clinically annotated, formalin fixed paraffin-embedded (FFPE) tissue samples provide extremely valuable research potential. Unfortunately, quality of nucleic acids and proteins extracted from FFPE material strongly depends on the treatment before, during and after fixation and embedding as well as on the retrieval of usable analytes. Major difficulties are crosslinking and heavy fragmentation of biomolecules, as well as the limited amount of FFPE sample material. The purification procedure needs to be highly efficient to recover as much usable analytes as possible. This talk will provide insights into major problems and possible solutions for the isolation of the biomolecules as well as for suitable downstream analyses.

 

Sample Preparation - From Technologies to Devices

Sébastien Ribault, PhD, Predevelopment-Technology-Collaboration R&D Manager, BioMonitoring, Lab Solutions, Merck Millipore, Millipore SAS, France

 

Sample preparation prior to molecular detection has to accommodate a broad range of matrices originating from biopharmaceutical industry, medical diagnostic, and environmental monitoring. Sample volume reduction is a key for sensitivity as well as removal of inhibitors, including proteins and undesired nucleic acids. We have developed technologies allowing positive selection of microbial contaminants nucleic acids versus eukaryotic ones, and proteins removal prior to concentration and final analysis. We incorporated the selected options in a device for contaminants testing focusing on high-volume processing, ease-of-use, reduced hands-on time, and false positive risk management. The efficiency of the method was proven for bacteria detection in hospital (urine, plasma, cerebrospinal fluid) and in biotech (bioreactor cell culture) samples. A great deal of effort was spent on the DNA-free topic for reagents and disposables, in order to avoid false positives with universal amplification assays.

 

Triggered Bioaerosol Sampling onto Dry Electret Filters; Wanted: Dead or Alive

David S. Alburty, CEO, InnovaPrep LLC

 

Tactical detect-to-warn bioaerosol systems must provide a physical sample for verification of a detected threat. A combined detector/collector developed by Areté Associates and InnovaPrep collects such samples on a dry electret filter at a rate of 200 LPM. The sample is rapidly eluted from the filters using a simple hand-held device, and is then concentrated and prepared for identification. Dry collection can reduce the viability of collected organisms. The effects of sampling and preparation on the post-sampling viability of vegetative bacteria will be compared to that of collected spores.

 

Inexpensive Sample Preparation and Storage for HIV Viral Load Testing

Catherine Klapperich, PhD, Associate Professor, Dept of Biomedical Engineering, Boston University

 

We have built and begun testing a small, portable tool that could be used to test a patient for HIV on the spot, or at "point-of-care". The tool, which is about the size of a student microscope, doesn’t require a power supply. The sample pops out of the tool so it can be processed and then shipped and stored. The input sample is whole blood and the output is dried, preserved RNA that can be stored at room temperature for later testing.

 

Improving Process Workflow in Molecular Diagnostic Testing

Len Vanderbosch, General Manager Invitek USA, Invitek GmbH

 

The workflow process in molecular diagnostic testing, from sample collection to final data analysis and reporting, involves a number of coordinated steps that requires a variety of interactions and manipulations of samples. Reducing the number of necessary steps while introducing the capability to perform multiplex analysis represent opportunities to simultaneously minimize potential for errors and improve processing timelines. The RTP® technology available from Invitek GmbH provides sample processing capabilities that will eliminate specific steps required for extracting and purifying nucleic acids from a variety of samples. The INFINITI® Analyzer from AutoGenomics, an automated multiplexing microarray platform for the analysis of DNA samples provides the ability to sort and measure multiple signals from a single sample. When used in conjunction, these two technologies can significantly improve the efficiency and effectiveness of any molecular diagnostic laboratory.

 

 

Rapid Detection of Pathogens in Complex Food Matrices

Byron Brehm-Stecher, PhD, Assistant Professor, Rapid Microbial Detection and Control Laboratory, Dept of Food Science & Human Nutrition, Iowa State University

 

Our ability to accurately screen for and detect pathogens in foods is crucial to maintaining the safety of these products. Much effort has been spent in both academia and industry on research and development aimed at improving the final step – detection. However, considered from a more holistic standpoint, the process of screening our foods for pathogens (or spoilage organisms) typically involves several interlinked steps. These include the initial sampling step, separation and concentration of microbial cells from complex food matrices, followed by labeling and detection of target cells. While the elements "upstream" from the detection step have traditionally been neglected or undervalued, all are critical to the final output and all must work in concert to yield optimal results. In this talk, I will provide examples of our recent work on detection of pathogens in complex foods and related matrices. Parallels between food, environmental and clinical diagnostics will be discussed, including how the same set of tools we have used in foods can also be applied to clinical problems such as detection of Candida albicans in blood.

 

 

 

 

Sample Preparation Integrated Waterborne Pathogen Monitoring System

Thomas Haiqing Gong, PhD, Associate Professor, Thermal and Fluids Engineering Division, School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore

 

Waterborne pathogen monitoring of drinking water is extremely challenging due to the large sample volume (1-1000 liters of water) and dirt particles in water sample. We present a sample preparation method for processing a large volume of water which is also integrated with a PCR array for rapid detection of waterborne pathogens. We also present an instrument which automatically processes the captured pathogens from cell capture to cell lysis, DNA extraction, purification and sample loading into a qPCR array with control reactions.

 

 

Universal Sample Prep for Third Generation Sequencing

Milena Iacobelli Martinez, PhD, Senior Laboratory Scientist, FLIR Systems, Inc.

 

Third generation sequencing technologies require purified HMW DNA to attain read lengths of tens of thousands of bases and beyond for optimal sequencing output. Therefore, ICx Biosystems has developed a universal sample prep device capable of isolating HMW DNA suitable for sequencing from environmental samples including spores, bacterial cells, and viruses. The integrated SCODA technology allows for specific concentration of HMW DNA and removal of contaminants that are detrimental to downstream processes.

 

Integrated Bioparticle Concentration for Improved Detection in Autonomous Systems

Andrew E. Page, President & CTO, InnovaPrep LLC

 

Autonomous detection systems are one cornerstone in protecting our nation and troops from biological threats. InnovaPrep has developed an automated concentration system that fills the need for an interface between large sample volumes and submilliliter volumes required by sample preparation and detection modules. The system provides orders of magnitude improvement in detection limits and is currently under evaluation in two DHS aerosol detection programs (e.g. MBAND-Biowatch Gen3, AESaP) and a DTRA-funded water monitoring application. Bioparticle fractionation, concentration, and integration hurdles will be discussed.

 

A Nano-Technology Enabled, Automated, Portable Sample Preparation Systems

D. Michael Connolly, PhD, President, Integrated Nano-Technologies, LLC

 

Biological samples are often in complex matrices containing substances that inhibit nucleic acid and/or immunological identification assays. In addition, relevant biomarkers are present at very low concentrations. Therefore, the sample must be isolated, cleaned, and concentrated prior to analysis.  With current methods, cleaning and separating whole cells, nucleic acids, and proteins is an involved manual and time consuming process that requires a wide range of laboratory equipment.  Integrated Nano-Technologies (INT) is developing a universal automated sample preparation approach for environmental and clinical samples including air filter material, soil, blood, tissue, and sputum. This universal automated sample preparation approach could be used as part of an integrated diagnostic system or as a stand-alone unit to provide analysis-ready purified samples for use in any other diagnostics systems. The preparation protocol relies on novel variations of ultrasonication and magnetic separation techniques. The sample preparation process is being automated in a novel rotary valve fluidic cartridge which has been developed and tested by INT. The unit being developed is a portable battery-powered device (under five pounds), using the disposable cartridge, which can run all steps of sample preparation in the field with minimal training. The simple operation of the system should allow for a CLIA waiver for medical diagnostics.

 

Filling the Critical Gap in Sample Preparation

Robert E. Carlson, PhD, President and Chief Science Officer, Receptors LLC

 

Sample preparation is commonly the "Achilles Heel" of many detection and diagnostic systems.  Generic methods like reverse phase media are limited by poor specificity while the analyte specific, antibody based methods are limited by cost and stability. RECEPTORS’ AFFINITY by DESIGN™ technology fills this significant simplicity versus specificity gap.  Our CARA™ SMART MATERIALS™ create the right balance of analyte concentration and purification using a scalable, cost effective technology.

 

The Need to Improve Sample Preparation to Advance Sensing of Microbial Contaminants in Marine Environments
Kelly D. Goodwin, PhD, Microbiologist, National Oceanic & Atmospheric Administration (NOAA)


Biological sensing, coupled with environmental data, is needed to produce assessments and forecasts related to marine ecoservices. NOAA is engaged in projects to develop marine sensors for detection of microbial contaminants and harmful algae in order to improve decisions about the closings of fisheries and recreational waters, to assess the health of marine ecosystems, and to ascertain threats to public health. Advanced technologies are at hand, including automated platforms for in-situ sampling and genetic analysis. However, such technologies must be enhanced for use in routine management, particularly in the realm of sample preparation. In particular, many current methods are hampered by poor and variable nucleic acid extraction efficiencies and co-extraction of inhibitory substances. This problem impedes true quantification and is acute for sensing rare targets such as pathogens or source-tracking markers. Biological sensing of seawater represents a particular challenge because of high salinity, inclusion of interfering compounds including humics, a high level of background organisms relative to the target contaminant(s), the uncharted molecular diversity of the indigenous microbes, and the need for target quantification within a regulatory framework. Approaches to solve sample preparation issues, including electrophoretic approaches, will be discussed.

 

PureLyse™ Sample Preparation

 

Bruce Irvine, Chief Technology Officer, Claremont BioSolutions LLC

 

ClaremontBio has created a novel method of rapid sample preparation that is entirely disposable; it requires no instrument. It provides mechanical cell lysis that can simultaneously extract nucleic acids or proteins.  Nucleic acid can be extracted in three to five minutes within two steps, binding and elution. Because lysis occurs mechanically rather than chemically harsh reagents are avoided that require multiple wash steps, the use of alcohols and drying steps. This system has been used to lyse and extract nucleic acids from E.coli, Bacillus subtilis vegetative cells and spores, Mycobacterium bovis, and Clostridium difficile. The disposable PureLyse® device is comprised of a micro-motor and vane that beat particles at unusually high shear forces.  As the shear forces lyse cells nucleic acid binds to the lysing particles. The sample is allowed to flow though the lysing chamber during lysis and binding, enabling a wide range of sample volumes to be processed and binding up to 10 ugm of DNA. Alternatively the same cartridge can be used for cell lysis only, the OmniLyse® cartridge, and the lysed sample can then be delivered for further processing. The lysing particles can also be functionalized for affinity capture of proteins. This has been done for His-tagged proteins using the HIS-PureLyse® version of the PureLyse® system. Proteins are extracted and purified in less than five minutes. Alternatively the lysate is easily adapted to the Claremont Bio HIS-Express® column for an increase in binding capacity up to up to 1.6 mg and 95% purity.

 

Cough Analyzer of Airborne Bacteria for Tuberculosis Diagnosis

Patrick Sislian, PhD, Principal, Deton Corp

 

Active Tuberculosis (TB) causes approximately 2 million annual deaths. An estimated 9.3 million people worldwide develop TB every year, of which ~4.4 million are undiagnosed. Improved TB diagnostic tests for developing countries will reduce the spread of infection and result in ~625,000 annually adjusted lives saved. In industrialized countries (e.g. US), the goal is TB elimination through diagnosis of multi-drug resistant TB (MDR-TB) and non-resistant TB in high-prevalence and high-risk populations. Most current diagnostics rely on sputum samples which are difficult to collect and are usually contaminated by saliva, lowering their quality. Furthermore, they inherently have a tradeoff between practicality (time, resources, training, cost) and performance (sensitivity and specificity). Deton’s proposed device is practical. A patient wears a disposable mask and coughs naturally into a novel impactor that breaks up the cough droplets in air and collects their DNA. The impactor avoids both sputum samples and microfluidics for lysing cells. The proposed device’s high performance is based on the automation of the collected DNA with a nucleic acid amplification test (NAAT) specific to TB and multi-drug resistant TB (MDR-TB). It serves as a point-of-care diagnostic or SSM replacement with an estimated total available yearly market of 280 million tests.

 

 

Sample Collection and Preparation for Virus and Pathogen Detection with Alternative Methods 

Esmeralda Carvalho, Bertin Technologies, France

 

 

In the context of environmental contamination control and bio-sample preparation, Bertin Technologies designs a range of laboratory equipment based on new technologies. Coriolis® is dedicated to the monitoring of bioaerosols. This cyclonic technology ensures a sampling method supplying a liquid sample compatible with Rapid Microbiological Methods (RMM) in order to get rapid, reliable and specific data on airborne microorganisms and to go beyond impaction method limits. Precellys®24 is dedicated to the sample preparation and cell lysis, to homogenize and grind soft and hard biological materials. This bead beating technology improves the first critical step in any molecular biology process and ensures high throughput, reproducibility, and time saving. Both equipment, Coriolis® and Precellys®24, combined with molecular diagnostic methods, provide sensitive, accurate and quantitative data about several airborne pathogens (e.g. warfare agents) as spores of pathogens, non cultivable microorganisms or even viruses. The combination of these equipment, Coriolis® with Precellys®24, with advances in molecular bio-analysis have now made it possible to rapidly detect, identify and accurately quantify airborne microorganisms and viruses. The limitations in monitoring and identifying pathogens in bioaerosols by microscopy or cultural methods can now be addressed by combining cyclonic air sampling, Coriolis®, bead-beating lysing cells, Precellys®24, with molecular diagnostic methods to provide sensitive, accurate and quantitative data on several pathogens. Several studies carried out with partners have shown interesting results and proved the efficiency of Coriolis in airborne viruses and pathogens’ collection and will it be presented.

 

Sample Preparation for Virus, Toxin & Pathogen Detection & Identification Conference 2011

Company Description : Includes a PDF file of the 18 presentations of the Annual Conference of the Knowledge Foundation's Sample Preparation for Virus, Toxin & Pathogen Detection & Identification series

Product Type : Business Conference

Author : Knowledge Foudation

PDF 455p
Video 09m

Languages : English

Ignoring The Detector: Fast, Modular, Agnostic Sample Preparation

Product Type : Business Conference

Author : Maxim Shusteff, Lawrence Livermore National Laboratory

PDF
Video 30s

Languages : English

Complete In Cartridge Sample Prepration for Rapid Antimicrobial Susceptibility Testing

Product Type : Business Conference

Author : Vincent Gau, Genefluidics

PDF
Video 30s

Languages : English

Integrated Lab on a chip for 8 plex Pathogen Detection

Product Type : Business Conference

Author : Claudia Gartner, microfluidic ChipShop GmbH

PDF
Video 30s

Languages : English

Seamless Sample to Answer BioAnalytical and Diagnostic Systems

Product Type : Business Conference

Author : Micheal Heller, University of California San Diego

PDF
Video 30s

Languages : English

Field Laboratory Analysis Prespectives from a Soldier Scientist

Product Type : Business Conference

Author : Kurt Schaecher, US Army

PDF
Video 30s

Languages : English

Universal Sample Preparation with Target Enrichment

Product Type : Business Conference

Author : Darren Gray, FLIR

PDF
Video 30s

Languages : English

Practical Developments in Surface Sampling and Detection

Product Type : Business Conference

Author : Peter White, DSTL

PDF
Video 30s

Languages : English

Laser Trace Vaporization of Trace Explosive Materials

Product Type : Business Conference

Author : Michael Papantonakis, Naval Research Laboratory

PDF
Video 30s

Languages : English

Infrared Amenable Sampling Methods for Water and Surface Based Agent Detection

Product Type : Business Conference

Author : Carl Tripp, University of Maine

PDF
Video 30s

Languages : English

Integratable Bioparticle Concentrator for Autonomous Systems

Product Type : Business Conference

Author : David Alburty, InnovaPrep LLC

PDF
Video 30s

Languages : English

An Easy to Use Hand Held Self Contained Sample Preparation Module for Low Resource Settings

Product Type : Business Conference

Author : Season Wong, Lynntech

PDF
Video 30s

Languages : English

Standardizing and Accelerating Analytical Sample Preparation Flexible Easy and Rugged

Product Type : Business Conference

Author : Annie Schnyder, Chemspeed Technologies AG

PDF
Video 30s

Languages : English

An Integrated System for Sample Processing and Diagnostics for Field Operations

Product Type : Business Conference

Author : Jose Alvelo, Integrated Nano Technologies LLC

PDF
Video 30s

Languages : English

Sample Preparation in Resource Limited Areas

Product Type : Business Conference

Author : Yousef Haj Ahmad, Norgen Biotek Corporation

PDF
Video 30s

Languages : English

Pressure Cycling Technology PCT for Improved Preparation and Analysis of Biothreat Agents and Infectious Microbial Samples

Product Type : Business Conference

Author : Bradford Powell, Pressure BioSciences

PDF
Video 30s

Languages : English

Improving the Methodologies for Identification of Campylobacter spp from Foods by Molecular Techniques

Product Type : Business Conference

Author : Omar Oyarzabal, Alabama State University

PDF
Video 30s

Languages : English

Aerosol or Liquid Collection and Detection in Minutes with BioFlash

Product Type : Business Conference

Author : Scott Perschke, PathSensors

PDF
Video 30s

Languages : English

Cough Analyzer of Airborne Bacteria for Lung Infection Diagnosis

Product Type : Business Conference

Author : Ramzi Joseph Nasr, Deton Corporation

PDF
Video 30s

Languages : English

Organizer : Knowledge Foundation

Serving the scientific community for over 10 years, the Knowledge Foundation and the Knowledge Press strive to be your primary source of information for the commercialization of advanced technologies.